Product Center

Max Organic-Type Ultrapure Water System

Application:HPLC, TOC, PCR, AAS, ICP, tissue culture, cell culture, protein detection, amino acid analysis, etc.

Model:

Max-10S Max-20S Max-30S Max-40S

category:

keywords:

Ultrapure Water System

Ultrapure water equipment

Product Introduction


Functions

Parameters

  • The entire body is made of engineering ABS with separated water and electricity components. It is non-toxic, environmentally friendly, and offers excellent acid, alkali, and corrosion resistance. 

 

  • 10" full-touch color screen with intelligent, fully automatic control in both Chinese and English provides real-time display of water quality, system status, and warnings. 

 

  • Voice interaction supports voice wake-up and command control. 

 

  • Power-on self-test, water shortage alarm, automatic standby when the water tank is full, water pressure overload protection, automatic/manual flushing, consumables failure alarm, history query, recycle function, clock setting, password change, and online water quality monitoring. 

 

  • Source water pressure reduction system avoids leaks. 

 

  • Dual-membrane process. 

 

  • Simultaneously produces RO pure water and UP water. 

 

  • Three-way water quality monitoring function. 

 

  • Automatic recirculation and timed recirculation functions ensure consistent water quality if ultrapure water does not meet standards. 

 

  • Live voice alarms and replacement prompts for consumable failures. 

 

  • Dynamic monitoring of equipment operation, displaying real-time operating status. 

 

  • Integrated large-capacity dual-channel pretreatment system and ultra-purification cartridge.TOC removal instrument

  • Real-time monitoring of consumable life. 

 

  • 1-50,000ml (50 L) quantitative water drawing and 1-10,800 seconds (3 hours) timed water drawing. 

 

  • 16,000+ alarm and operation log query capabilities. 

 

  • USB portfor downloading records at any time. 

 

  • 30L antibacterial conical watertank (HDPE), double-layer design, dedicated airfilter, full-range liquid level monitoring, and bottom drain valve. 

 

  • Stable flow rate design: A constantflow pump ensures consistent water production at temperatures between 7°C -35°C. The pure waterflow path enables wastewaterrecycling and repurification. 

 

  • Timed on/off function. 

 

  • With UV sterilization system. 

 

  • The system is equipped with a 0.22 μm PE polyethersulfone composite membrane terminal sterilization filterto ensure water quality. 

 

  • One-touch disinfection function. 

 

  • Grade Ⅲ PIN password protection.

RO pure water:Conductivity≤1μs/cm@25℃ , the water quality reaches the level of water used for tes ting and analysis in China 《GB6682-2016》 Grade Ⅱ. UP ultra-purewater:resistivity 18.25MΩ . cm@25℃ , better than《GB6682- 2016 》grade Ⅰ ,the water quality reaches CAP , ASTM , NCCLS standard and the national electronic grade Ⅰ ultra-pure water standard.

 

Soluble silicon[SiO2]<0.01mg/LMicroparticles/particulate matter(>0.1μm)content<1/ml

 

Bacterial content<0.1cfu/ml(when selecting terminal sterilizing filter), RNase<0.01ng/m

 

Silicon retention rate>99.9%, Absorbance(254nm,1cm optical path)≤0.001

 

Heat source content<0.001Eu/ml, TOC≤5ppb, RNase<4pg/μl

 

Metal cation content(PPb): Fe<0.005 Cu<0.005 Al<0.005 Ni<0.005 

                                             Zn<0.02 Cr<0 .005  Na<0.01  K<0.02 
 

Anion content(PPb) :Cl-<0.01 NO2-<0.02 NO3-<0.02 SO42 -<0.01

 

Water source:tap water,1-45℃, 0.1-0.5Mpa, TDS<300ppm


Production: 10L/H, 20L/H, 30L/H, 40L/H


Water drawing: 1.5-2L/ min(full tank)


Power:220V/50Hz,40-100W,Noise≤40(dB)


Dimensions:L x W x H( 570mm×455mm× 610mm)


Weight:35kg

Related Products

Online
Message


If you have any suggestions or feedback about our company, please fill in the relevant information on this page and submit it. Our staff will contact you in a timely manner, or please call us directly.

submit